9-28 SPARC Enterprise Mx000 Servers XSCF User’s Guide • January 2012
For COD settings and command information, see the COD User’s Guide and the
XSCF Reference Manual.
Note – In the M3000 server, this function is not available.
TABLE 9-23 lists the functions for configuring Sun Management Center agent. Select
[Setting]-[Sun MC] in the Menu tree.
TABLE 9-24 lists the functions for configuring the authentication timeout period for
XSCF Web console. Select [Settings]-[Autologout] in the Menu tree.
Utility
The Pages of Utility include remote maintenance service, firmware update, XSCF
reset, and XSCF switch (M8000/M9000 servers only).
Note – This document does not provide details on the function of the remote
maintenance service. For information of the remote maintenance service, see the
Product Notes for your server.
TABLE 9-23 Sun Management Center Agent Configuration
Function Remarks
Sun Management Center Agent Configuration Displays setup information and status of Sun
Management Center agent.
Start or stop the Sun Management Center agent
and make changes to its configuration.
These functions are equivalent to the
showsunmc(8) and setsunmc(8) commands.
TABLE 9-24 Auto Logout Configuration (XSCF Web)
Function Remarks
Timeout period display and configuration After logging in XSCF, if the system is not used for
a certain period, logout is automatically performed.
Displays and specifies the timeout period in
minutes.
The authentication timeout is 10 minutes by
default. The monitoring interval ranges from 1 to
255 minutes.
To Next Page
Loading...
Need help?
General