Funkwerk R1202 - Page 100

To Next Page

To Previous Page

Fields in the Automatic Time Settings (Time Protocol) menu

Field Description

ISDN Timeserver Define whether the time information received at an incoming

ISDN connection is used to update the system time. If a time

server is configured, the time is only determined over ISDN until

a successful update is received from this time server. Updating

over ISDN is deactivated for the period in which the time is de-

termined by means of a time server.

The function is activated with #/

The function is disabled by default.

First Timeserver Enter the primary time server, by using either a domain name or

an IP address.

In addition, select the protocol for the time server request.

Possible values:

• -*+ (default value): This server uses the simple network

time protocol with UDP port 123.

• + -% 7 31 : This server uses the time service

with UDP port 37.

• + -% 7 +4 : This server uses the time service

with TCP port 37.

• * : This time server is not currently used for the time re-

quest.

Second Timeserver Enter the secondary time server, using either a domain name or