Funkwerk R1202 - Interfaces; Groups

Field Description
UDP Inactivity Enter the inactivity time after which a UDP session is to be re-
garded as expired (in seconds).
Possible values are ' to .
The default value is .
TCP Inactivity Enter the inactivity time after which a TCP session is to be re-
garded as expired (in seconds).
Possible values are ' to .
The default value is '.
PPTP Inactivity Enter the inactivity time after which a PPTP session is to be re-
garded as expired (in seconds).
Possible values are ' to .
The default value is .
Other Inactivity Enter the inactivity time after which a session of another type is
to be regarded as expired (in seconds).
Possible values are ' to .
The default value is '.
19.2 Interfaces
19.2.1 Groups
A list of all configured interface routes is displayed in the Firewall->Interfaces->Groups
menu.
You can group together the interfaces of your device. This makes it easier to configure fire-
wall rules.
19.2.1.1 New
Choose the New button to set up new interface groups.
19 Firewall Funkwerk Enterprise Communications GmbH
374 bintec Rxxx2/RTxxx2