Funkwerk R1202 - E-Mail Alert Recipient

Field Description
SMTP Authentication
Authentication expected by the SMTP server.
Possible values:
• * (default value): The server accepts and send emails
without further authentication.
• -(+: The server only accepts e-mails if the router logs in
with the correct user name and password.
• -(+  ?: The server requires that e-mails are
called via POP3 by the sending IP with the correct POP3 user
name and password before sending an e-mail.
User Name
Only if SMTP Authentication = -(+ or -(+  ?.
Enter the user name for the POP3 or SMTP server.
Password
Only if SMTP Authentication = -(+ or -(+  ?.
Enter the password of this user.
POP3 Server
Only if SMTP Authentication = -(+  ?
Enter the address of the server from which the e-mails are to be
retrieved.
POP3 Timeout
Only if SMTP Authentication = -(+  ?
Enter how long the router must wait after the POP3 call before it
is forced to send the alert mail.
The default value is  seconds.
23.3.2 E-mail Alert Recipient
A list of Syslog messages is displayed in the E-mail Alert Recipient menu.
23 External Reporting Funkwerk Enterprise Communications GmbH
498 bintec Rxxx2/RTxxx2