Chapter 2 About this guide
This document is valid for bintec devices with system software as of software version
7.10.1.
The Reference, which you have in front of you, contains the following chapters:
User's Guide - Reference
Chapter Description
Introduction You see an overview of the device:
About this guide We explain the various components of this manual and how to
use it.
Installation This contains instructions for how to set up and connect your
device.
Basic configuration This chapter provides a step-by-step guide to the basic func-
tions on your device.
Reset This chapter explains how to reset your device to the ex works
state.
Technical data This section contains a description of all the device's technical
properties.
Variable switching of S0
interfaces
This section describes how to switch the S0 interfaces from ex-
ternal to internal.
Access and configura-
tion
This includes explanations about the different access and con-
figuration methods.
Assistants
System Management
Physical Interfaces
LAN
Wireless LAN Control-
ler
Networking
Routing Protocols
These chapters describe all configuration options of the Funk-
werk Configuration Interface. The individual menus are de-
scribed in the order of navigation.
The individual chapters also contain more detailed explanations
on the subsystem in question.
Funkwerk Enterprise Communications GmbH
2 About this guide
bintec Rxxx2/RTxxx2 3
To Next Page
Loading...