Field Description
between Retries fore resending a L2TP control packet for which it received no re-
sponse.
The wait time is dynamically extended until it reaches the Max-
imum Time between Retries. The available values are to
, the default value is .
Maximum Time
between Retries
Enter the maximum time (in seconds) that your device waits be-
fore resending a L2TP control packet for which it received no re-
sponse.
The available values are to , the default value is .
Maximum Retries Enter the maximum number of times your device is to try to re-
send the L2TP control packet for which is received no response.
The available values are to , the default value is .
Data Packets Se-
quence Numbers
Select whether your device is to use sequence numbers for
data packets sent through a tunnel on the basis of this profile.
The function is not currently used.
The function is enabled with #/.
The function is disabled by default.
18.2.2 Users
A list of all configured interface L2TP partners is displayed in the VPN->L2TP->Users
menu.
18.2.2.1 New
Choose the Newbutton to set up new L2TP partners.
Funkwerk Enterprise Communications GmbH
18 VPN
bintec Rxxx2/RTxxx2 347
To Next Page
Loading...