Chapter 10 System Management
The System Management menu contains general system information and settings.
You see a system status overview. Global system parameters such as the system name,
date/time, passwords and licences are managed and the access and authentication meth-
ods are configured.
10.1 Status
If you log into the Funkwerk Configuration Interface , your device's status page is dis-
played, which shows the most important system information.
You see an overview of the following data:
• System status
• Your device's activities: Resource utilisation, active sessions and tunnels
• Status and basic configuration of the LAN, WAN, ISDN, and ADSL interfaces
• Information on plugged add-on modules (if any)
• The last 10 system messages
You can individually customise the update interval of the status page by entering the de-
sired period in seconds for Automatic Refresh Interval and clicking on the Apply button.
Caution
Under Automatic Refresh Interval do not enter a value below seconds, otherwise
the refresh interval of the screen will be too short to make further changes!
Funkwerk Enterprise Communications GmbH
10 System Management
bintec Rxxx2/RTxxx2 77
To Next Page
Loading...