3 RESET Reset button
4 ETH5 Ethernet interface
5 ETH1 - ETH4 10/100/1000 Base-T Ethernet interface
6 BRI1 - BRI2 ISDN BRI interface
7 PRI1 - PRI2 ISDN-PRI interface
9 LED LED display
bintec RT4202 has a 4-port Ethernet switch, a serial interface, an ETH5 interface, four
ISDN BRI interfaces and four FXS interfaces.
The connections are arranged as follows:
Fig. 10: Front of bintec RT4202
Front of bintec RT4202
1 CONSOLE Serial interface
2 POWER / STATUS LED display for power and status
3 RESET Reset button
4 ETH5 Ethernet interface
5 ETH1 - ETH4 10/100/1000 Base-T Ethernet interface
6 BRI1 - BRI4 ISDN BRI interface
9 LED LED display
10 FXS1 - FXS4 FXS interfaces
6.5 Pin Assignments
6.5.1 Serial interface
Your device has a serial interface for connection to a console. This supports Baud rates
from 1200 to 115200 Bps.
6 Technical data Funkwerk Enterprise Communications GmbH
36 bintec Rxxx2/RTxxx2
To Next Page
Loading...