Fig. 39: System Management->Remote Authentication->RADIUS->New
The System Management->Remote Authentication->RADIUS->Newmenu consists of
the following fields:
Fields in the Basic Parameters menu
Field Value
Authentication Type Select what the RADIUS server is to be used for.
Possible values:
• 0% (standard value only for PPP con-
nections): The RADIUS server is used for controlling access
to a network.
• 0%%$(for PPP connections only): The RADIUS server
is used for recording statistical call data.
• 2$ 0%: The RADIUS server is used for
controlling access to the SNMP shell of your device.
• -% 0%: The RADIUS server is used for
sending configuration data for IPSec peers to your device.
Funkwerk Enterprise Communications GmbH
10 System Management
bintec Rxxx2/RTxxx2 101
To Next Page
Loading...