Field Description
uration Type.
• ;$: Detection is still running.
Port Usage Only if Autoconfiguration on Bootup is disabled.
Select the protocol that you want to use for the ISDN port.
Possible values:
• * &: The ISDN connection is not used.
• 1/, -1*"
• 2& 2
• D!-
ISDN Configuration
Type
Only if Autoconfiguration on Bootup is disabled and for Port
Usage = 1/, -1*" or D!-
Select the ISDN connection type.
Possible values:
• !!(/, (default value): Point-to-multipoint
connection
• !!: Point-to-point ISDN access.
ISDN Switch Type Only for Port Usage = 2& 2
Select the ISDN protocol supplied by your provider.
Possible values:
• 2& 2 > -: Leased line over B channel 1 (64
kbps)
• 2& 2 ><> -: Leased line over both B chan-
nels (128 kbps)
• 2& 2 1<><> +-: Leased line over D-channel
and both B channels (144 kbps)
• 2& 2 ><> 1 ,&: Leased
line to two different endpoints.
• 2& 2 ><1 +-: Leased line over B channel 1
and D-channel (80 kbps)
• 2& 2 ><1 +-: Leased line over B channel 2
and D-channel (80 kbps)
Funkwerk Enterprise Communications GmbH
11 Physical Interfaces
bintec Rxxx2/RTxxx2 129
To Next Page
Loading...