Field Description
channels apart, as a network also partially occupies the adja-
cent channels.
In the case of manual channel selection, please make sure first
that the APs actually support these channels.
Possible values (according to the selected wireless module pro-
file):
• For Operation Band = @G 7?
Possible values are to ' and 0(default value).
• For Operation Band = @G
Possible values are ', , , and 0 (standard
value)
• For Operation Band = @G 7? and @G
?
Only the 0 option is possible here.
Used Channel Only for managed APs.
Displays the channel that is currently in use.
Transmit Power Displays the transmission power. You can select another trans-
mission power.
Possible values:
• (= (default value): The maximum antenna power is used.
• >
• >
• >
• >
• >
Assigned Wireless
Network (VSS)
Displays the wireless networks that are currently assigned.
Funkwerk Enterprise Communications GmbH
13 Wireless LAN Controller
bintec Rxxx2/RTxxx2 167
To Next Page
Loading...