Field Description
• 2+
• ?-5
• 3
• ;1
• ;-8
• -9
• +4
• +2-
• 31
• 8;;
• C*-!1
Source IP Address/
Netmask
For Type of traffic = %$ 1& *0+"
only.Enter the source IP address and corresponding netmask of
the original data packets, as the case arises.
Original Destination IP
Address/Netmask
For Type of traffic = %$ 1& *0+"
only.Enter the destination IP address and corresponding net-
mask of the original data packets, as the case arises.
Original Source IP Ad-
dress/Netmask
Only for Type of traffic = $$ -% *0+". Enter
the source IP address and corresponding netmask of the origin-
al data packets, as the case arises.
Destination IP Ad-
dress/Netmask
Only for Type of traffic = $$ -% *0+". Enter
the destination IP address and corresponding netmask of the
original data packets, as the case arises.
In the NAT Configuration->Replacement Values menu you can define, depending on
whether you're dealing with inbound or outbound data traffic, new addresses and ports, to
which specific addresses and ports from the NAT Configuration->Specify original traffic
menu can be translated.
Fields in the Replacement Values menu
Field Description
New Destination IP Ad-
dress/Netmask
Only for Type of traffic = %$ 1& *0+".
Enter the destination IP address to which the original source IP
address is to be translated, with corresponding netmask, as the
14 Networking Funkwerk Enterprise Communications GmbH
196 bintec Rxxx2/RTxxx2
To Next Page
Loading...