Fig. 88: Networking->Access Rules->Interface Assignment->New
The Networking->Access Rules->Interface Assignment->New menu consists of the fol-
lowing fields:
Fields in the Basic Parameters menu
Field Description
Interface Select the interface for which a configured rule chain is to be as-
signed.
Access Rules Select a rule chain.
Silent Deny
Define whether the sender is to be informed if an IP packet is
denied.
The function is enabled with #/.
The function is activated by default.
Reporting Method
Define whether a syslog message is to be generated if a packet
is denied.
Possible values:
• * ,: No syslog message.
• (default value): A syslog message is generated with the
protocol number, source IP address and source port number.
• 1,: A syslog message is generated with the contents of the
first 64 bytes of the denied packet.
14 Networking Funkwerk Enterprise Communications GmbH
226 bintec Rxxx2/RTxxx2
To Next Page
Loading...