Field Description
rate charge.
Connection Idle
Timeout
Only if Always on is disabled
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are to ' (seconds). deactivates the
short hold.
The default value is '.
Example: for FTP transmission, for LAN-to-LAN transmis-
sion, for Internet connections.
Fields in the IP Mode and Routes menu
Field Description
IP Address Mode Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
• 0&& (default value): Your device is dynamically
assigned an IP address.
• -% : You enter a static IP address.
Default Route Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with #/.
The function is enabled by default.
Create NAT Policy Specify whether Network Address Translation (NAT) is to be ac-
tivated.
The function is enabled with #/.
The function is enabled by default.
Local IP Address Only if IP Address Mode = -%
Funkwerk Enterprise Communications GmbH
17 WAN
bintec Rxxx2/RTxxx2 265
To Next Page
Loading...