Field Description
• 3, (default value): The peer is available for setting up a tunnel
immediately after saving the configuration.
• 1: The peer is initially not available after the configuration
has been saved.
Description Enter a description of the peer that identifies it.
The maximum length of the entry is 255 characters.
Peer Address Enter the official IP address of the peer or its resolvable host
name.
The entry can be omitted in certain configurations, whereby
your device then cannot initiate an IPSec connection.
Peer ID Select the ID type and enter the peer ID.
This entry is not necessary in certain configurations.
The maximum length of the entry is 255 characters.
Possible ID types:
• 5//) D/ 1 * 5D1*"
• !/ 0&&
• 8 0&&
• 0-*!1* 1&$& *"
On the peer device, this ID corresponds to the Local ID Value.
Internet Key Exchange Select the version of the Internet Exchange Protocol to be used.
Possible values:
• 9 (default value): Internet Kex Exchange Protocol Ver-
sion 1
• 9: Internet Kex Exchange Protocol Version 2
Preshared Key Only for Internet Key Exchange = 9
Enter the password agreed with the peer.
The maximum length of the entry is 50 characters. All charac-
ters are possible except for = at the start of the entry.
18 VPN Funkwerk Enterprise Communications GmbH
316 bintec Rxxx2/RTxxx2
To Next Page
Loading...