EasyManua.ls Logo

Funkwerk R1202 - Page 338

Funkwerk R1202
594 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Field Description
(by an outgoing ISDN call).
Incoming Phone Num-
ber
Only for Mode = && or >.
Enter the ISDN number from which the remote device calls the
local device (calling party number). Wildcards may also be
used.
Outgoing Phone Num-
ber
Only for Mode = 0% or >.
Enter the ISDN number with which the local device calls the re-
mote device calls (called party number). Wildcards may also be
used.
Transfer own IP ad-
dress over ISDN/GSM
Select whether the IP address of your own device is to be trans-
ferred over ISDN for IPSec callback.
The function is enabled with #/.
The function is disabled by default.
Transfer Mode Only for Transfer own IP address over ISDN/GSM = enabled
Select the mode in which your device is to attempt to transfer its
IP address to the peer.
Possible values:
0% #& : Your device automatically de-
termines the most favourable mode. It first tries all D channel
modes before switching to the B channel. (Costs are incurred
for using the B channel.)
0% /) 1 4/ (&: Your device auto-
matically determines the most favourable D channel mode.
The use of the B channel is excluded.
3& &,%% 1 4/ (: Your device tries to
transfer the IP address in the mode set in the Mode field.
+) &,%% 1 4/ (E // #%  >
4/: Your device tries to transfer the IP address in the
mode set in the Mode field. If this does not succeed, the IP
address is transferred in the B channel. (This incurs costs.)
3& /) > 4/ (: Your device transfers the IP
address in the B channel. This incurs costs.
18 VPN Funkwerk Enterprise Communications GmbH
324 bintec Rxxx2/RTxxx2

Table of Contents

Related product manuals