Field Description
Configuration contains
certificates/keys
Only for Command Type = 4$ ($
and Action = , %$ or =, %$!
Select whether the certificates and keys contained in the config-
uration are to be imported or exported.
The function is disabled by default.
Encrypt configuration
Only for Command Type = 4$ ($
and Action = , %$ or =, %$!
Define whether the data of the selected Action are to be en-
crypted..
The function is disabled by default.
Reboot after execution
Only if Command Type = 4$ ($
Select whether your device should restart after the intended Ac-
tion.
The function is disabled by default.
Version Check
Only for Command Type = 4$ ($
and Action = , %$
Select whether, when importing a configuration file, to check on
the server for the presence of a more current version of the
already loaded configuration. If not, the file import is interrupted.
The function is disabled by default.
Destination IP Address
Only if Command Type = $ +&
Enter the IP address whose accessibility is to be checked.
Source IP Address
Only if Command Type = $ +&
Enter an IP address to be used as sender address for the ping
test.
Possible values:
21 Local Services Funkwerk Enterprise Communications GmbH
454 bintec Rxxx2/RTxxx2
To Next Page