Furuno INMARSAT-C FELCOM 18 User Manual

9. E-MAIL BY PC
9-5
9.3.2 DHCP setting
1. Press the F8 and 1 keys to show the [System Setup] menu.
2. Select [Network Setup] then press the Enter key.
3. Select [Network] then press the Enter key.
4. Select [DHCP] then press the Enter key.
5. Select [ON] then press the Enter key.
6. Press the Esc key to show the [Update] window.
7. [Yes] is selected; press the Enter key. A message asks you to restart the FEL-
COM.
8. Long-press the Esc key to return to the standby display.
9. The terminal unit is restarted. After restarting is completed, confirm that IP ad-
dress and subnet mask have been assigned.
LAN port
FURUNO
FELCOM
PCPC
HUB
10BASE-T(100BASE-T)
Straight cable
10BASE-T(100BASE-T)
Straight cable
DHCP Server

Furuno INMARSAT-C FELCOM 18 Specifications

General

Brand	Furuno
Model	INMARSAT-C FELCOM 18
Category	Marine Radar
Language	English