4. FILE OPERATIONS
4-10
4.10 How to Decode an E-Mail Attachment
When you cannot read an e-mail attachment because it has been coded by MIME
(Multipurpose Internet Mail Extensions), you may decode it as shown below.
1. Save the MIME-coded file to an SD card or the internal memory. (See
section 5.2.5 for the procedure.) This step is not necessary if [Auto Receive Mes-
sage Save] is turned on in the [Auto Mode Setup] menu.
2. Press the F1 and 9 keys to select [MIME (Decode)]. A list of files stored on the SD
card or internal memory appears.
3. Select the file to decode then press the Enter key.
4. [Yes] is selected; press the Enter key to decode the file.
5. To change the file name, press the BackSpace key to erase the file name, enter
a new file name then press the Enter key. After decoding the file the screen looks
something like the one shown below.
6. Long-press the Esc key to return to the standby display.
7. Press the F1 and 2 keys.
8. Select the file selected at step 5 then press the Enter key.
MIME Decode
Checking 'E0970715.001'
. . .
Decode 'ABC.ini'?
Decode
Yes No
File chosen
File attachment
Save
[C:\ABC.ini ]
To View: SPACE Make Dir: INS Remove Dir: DEL
372
6794
987
11-12-25 02:52
11-12-25 02:59
11-12-25 03:10
Filename Size Date & Time
E0970715.001
E0970715.002
E0970715.003
3 Files exist 579584 bytes free
Internal Memory <DRIVE>
MIME Decode
Checking 'E0970715.001'
. . .
Decode 'ABC.ini'?
Now decoding
. . .
Complete.
Decoded 1 file (s).
Press any key to escape.
To Next Page
Loading...
