5. INMARSAT COMMUNICATIONS
5-15
5.2 Receiving
5.2.1 When a message is received
When the FELCOM receives a telex or e-mail successfully it displays the message
"Successful Receiving message." If [Auto Receive Message Save] and [Auto Receive
Message Print] (in the [Auto Mode Setup] menu) are set for ON, the message is auto-
matically saved and printed (except confidential and password-affixed messages).
Received message alarm
If [Receive Alarm] in the [Auto Mode Setup] menu is set for ON, the audio alarm
sounds when a telex or e-mail is received. You may silence the alarm with the F10 key.
Receive message format
Each message received is assigned a message number. This number is also used
when saving the file to an SD card.
Log
The [Communication Log] (see section 5.3) shows message number, priority, date
and time of reception, LES ID and file size (in bytes) of the latest 50 received and sent
messages.
Printing
When [Auto Receive Message Print] in the [Auto Mode Setup] menu is set for ON, re-
ceived messages (except confidential and password-affixed messages) are automat-
ically printed. Manual printing is also available.
Saving and filing
Received messages are filed in the [Received Message] list, at the terminal unit spec-
ified with [Message Output Port] on the [System Setup] menu. The [Received Mes-
sage] list shows the following:
• Received message no.
• LES ID
• Priority
• File size (in bytes)
• Message classification
• Password for confidential messages
• Date and time of reception
• Status
R
Receive
0
0: main DTE
1: ext. DTE
1 1
year
1 2
month
2 5.
day
0 0 1
received
message no.
To Next Page
Loading...
