10. MAINTENANCE AND TROUBLESHOOTING
10-9
Alert status
10.7.3 Warning messages
Warning messages are shown in a pop-up with the prefix "WARNING:" The messages
are automatically scrolled to show the latest warnings. Warnings cannot be re-viewed
once scrolled.
Alert Icon
Act-Unack Warning occurring (not confirmed in
pop-up message)
Silenced Warning occurring (buzzer stopped by
BAM system)
Act-Ack Warning occurring (confirmed in pop-up
message)
Act-RT Warning occurring (Responsibility
Transferred status)
Rec-Unack Warning resolved (not confirmed in pop-
up message)
Active Caution occurring
Error message Meaning Action
Cannot enter new DNID.
Memory full for DNIDs.
Memory for DNIDs is full. Delete unnecessary DNIDs to
enter new ones.
Cannot enter new ENID.
Memory full for ENIDs.
Memory for ENIDs is full. Delete unnecessary ENIDs to
enter new ones.
Cannot find NCS CC in all
region. Scanning is continued.
No NCS found in region. Scanning automatically
continues.
Cannot find NCS CC in
preferred region. Scanning all
region is started.
NCS could not be found in
region selected. Scanning
started to find NCS.
If NCS could not be found,
contact your dealer for advice.
Memory full for receiving msg. The memory for RX messages
is full.
Delete unnecessary RX
messages.
Disk full. Can’t write “filename”. The SD card has reached
maximum capacity.
Delete unnecessary files or
change the SD card.
Memory full. Cannot save the
new file.
To Next Page
Loading...
Need help?
General
