9. E-MAIL BY PC
9-9
9.3.7 How to connect the FELCOM to the shipboard LAN mail server
When a mail server is installed on a LAN, received mail is forwarded to the mail server
via the LAN. The illustration on the next page shows how mail is forwarded to the mail
server.
Mail server: 172.32.16.10
LAN domain name: ship.furuno.co.jp
Forwarding mail address: felcom@ship.furuno.co.jp (IP Address: 172.31.16.2)
If there is no mail server, disregard the procedure below.
1. Press the F8 and 1 keys to show the [System Setup] menu.
2. Select [Network Setup] then press the Enter key.
3. Select [Mail Gateway] then press the Enter key.
4. Select [Delivery To] then press the Enter key.
5. Select the location where to deliver e-mail then press the Enter key.
PC Mailer: A mail-dedicated PC is connected to the FELCOM. The mail received
by the FELCOM can be read by the PCs.
Server: The FELCOM is connected to mail server connected to a LAN. Mail re-
ceived by the FELCOM is forwarded to the mail server.
6. Select [Server IP] then press the Enter key.
7. Enter server IP address then press the Enter key.
8. Select [Address Mode] then press the Enter key.
9. Select [Fixed] or [Auto] as appropriate and then press the Enter key.
Auto: When the keyword (entered in Auto Delivery Keyword) is found in the text
of a message, the message is sent to the address which appears after the key-
word. If the keyword is not found the mail is delivered to “Mail Address.”
Fixed: Message is sent mail address specified in Mail Address.
10. Select [Mail Address] then press the Enter key.
11. Enter the IP address of the PC where the e-mail server is to forward e-mail then
press the Enter key.
12. Press the Esc key to show the [Update] window.
13. [Yes] is selected; press the Enter key. The message "Press ESC key to Restart
FELCOM18." appears.
14. Press the Esc key to restart.
To Next Page
Loading...
