4-1
4. FILE OPERATIONS
This chapter describes how prepare, edit, save and print files (messages).
4.1 Files and Working Areas
To create a new message it is necessary to open a new file. After a new file is opened,
one of two working areas in the internal memory is secured to create the message.
The term “open a file” also refers to the loading of a prepared file into a working area.
When you remove a file from a working area this is called “closing a file.”
4.2 Preparing Files
There are two types of files: routine and confidential. Files can be assigned a file name
and saved to an SD card or the internal memory, for later use. The maximum message
size is 32 kilobytes.
4.2.1 How to prepare a routine file
1. Press the F1 key to open the [File] menu.
SD CARD MEMORY
INTERNAL MEMORY
FILE 1
FILE 2
FILE 3
FILE 4
INTERNAL MEMORY
1
2
Save Area
Save Area
TWO WORKING AREAS
Display
LCD
Can select one for display.
(Change Window on Edit menu)
[C: ] (Max. 2 GB)
[A: ] (Max. 2.4 GB)
File
1. New
2. Open
3. Close
4. Save
5. Delete
6. Rename
7. Print
8. Remove SD Card
9. MIME (Decode)
ALT-N
ALT-O
ALT-Q
ALT-S
ALT-D
ALT-P
0. Format SD
To Next Page
Loading...
