Furuno INMARSAT-C FELCOM 18 User Manual

2. OPERATIONAL OVERVIEW
2-2
2.1.1 Audio alarm
The terminal unit releases an audio alarm under the following conditions.
2.1.2 How to adjust the display brightness
Adjust the display brightness as shown below. Ten levels are available.
Increase brightness: Alt+F7
Decrease brightness: Alt+F6
2.1.3 How switch between Day and Night mode
To switch between Day mode (Preset 1) and Night mode (Preset 3), press and hold
the Alt key then press the F8 key.
2.2 Keyboard
The FELCOM is almost 100% keyboard controlled. Operation is carried out with the
function keys, numbered F1-F10 at the top of the keyboard. The figure below shows
the keyboard and the function of each function key.
Unit
Telex,
e-mail
rec’d
Distress
ACK
rec’d
EGC message received
Trouble
found
Distress Urgent
Safety/
Normal
Terminal unit
IC-218
YES YES YES YES NO YES
Distress alert/
Received call unit
IC-305, Alarm Unit
IC-350
NO YES YES YES NO NO
Alarm unit IC-306YESNONONONOYES
Function Keys
File
Edit
Transmit
EGC
Reports
StopAlarm
Distress
Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12
- Logs
- Lower display brilliance:
Hold [Alt] key and press this key.
- Options
- Raise display brilliance:
Hold [Alt] key and press this key.
- Setup
- Switch between Day/Night mode
Hold [Alt] key and press this key.

Furuno INMARSAT-C FELCOM 18 Specifications

General

Brand	Furuno
Model	INMARSAT-C FELCOM 18
Category	Marine Radar
Language	English