FURUNO
FELCOM 18
SP - 2 E5674S01S
210324
Ethernet IEC61162-450, IEC61162-1 Ed.5
Input ACK, ACN, SRP
Output ALC, ALF, ALR, ARC, HBT, SM1/2/3/4, SMB, SRP
Datagram type UdPbC
Output proprietary sentences
PFEC rminf, rmalr
4.3 IEC61162-450 transmission group
Input Arbitrary (default: MISC), NETA
Output NETA, RCOM
4.4 Other network functions (except IEC61162-450)
DHCP, AutoIP, SMTP, POP3, PC terminal connect Protocol,
Furuno Management Protocol (FMP)
5 POWER SOURCE
5.1 Terminal unit 12-24 VDC: 8.0-4.0 A (Transmitting), 1.0-0.5 A (Receiving)
5.2 Printer (PP-520, option) 24VDC: 1 A max.
5.3 AC/DC power supply unit (option)
PR-240 100-115/200-230 VAC, 1 phase, 50/60 Hz, 24 VDC from battery
PR-241 100-230 VAC, 1 phase, 50-60 Hz, 24 VDC from battery
6 ENVIRONMENTAL CONDITION
6.1 Ambient temperature
Antenna unit -35°C to +55°C (storage: -35°C to +70°C)
Other indoor units -15°C to +55°C
Note: Antenna unit is categorized as an outdoor installation equipment and other units are for
indoor installation.
6.2 Relative humidity 95% or less at +40°C
6.3 Degree of protection
Antenna unit IP56
Terminal unit IP20 (IP22: option)
Distress alert/received call unit/ SSAS alert unit
IP20 (IP22: option, bulkhead mount)
Alarm unit IP22
Junction box IP20 (IP22: option, tabletop mount)
Printer/ Keyboard IPX0
6.4 Vibration IEC 60945 Ed.4
7 UNIT COLOR
7.1 Antenna unit Upper: N9.5, Lower: 2.5PB3.5/10
7.2 Terminal unit/Junction box N2.5
7.3 Others 2.5GY5/1.5
To Next Page
Loading...
Need help?
General
