Furuno INMARSAT-C FELCOM 18 - Page 27

2. OPERATIONAL OVERVIEW
2-11
BAM mode and active alert
The active alert screen displays the latest three active alerts at the bottom right of the
screen (sorted by priority and time of occurrence). Press the F12 key to display the
alert list and check all alerts.
When no alert has occurred, the following indication appears.
File Edit Transmit EGC Reports Logs Options Setup Distress StopAlarm
Date
Time
Position
Waypoint
Course DEG
Speed kn
Current NCS
Current Channel
Current TDM
MES Status
GPS Status
DCE Memory
11-11-11
04:25 (UTC)
LAT
LON
LAT
LON
144 (AORE) LOGOUT
UNSYNC
UNSYNC (144)
Idle
ACQ
32818 Bytes free
IMN:
BBER
C/N
Send Level
Rx AGC Level
REF Offset Freq
Synthe Local
TCXO Control 131
Antenna Power Supply
Water Temperature
Water Current
Direction
Speed
Depth
443156710
000
NG ( 30 dB)
OK ( 0)
OK (254)
NG ( 468 Hz)
OK
NG (12.0V)
Current State: IDLE
TROUBLE: ANT power voltage
UNSYNC
NCS: AORE
DEG
DEG
kn
ANT V abnormal.
Inval id MES ID
Sync loss.
Total 11. F12:All alert list
File Edit Transmit EGC Reports Logs Options Setup Distress StopAlarm
Date
Time
Position
Waypoint
Course DEG
Speed kn
Current NCS
Current Channel
Current TDM
MES Status
GPS Status
DCE Memory
19-07-18
22:40 (UTC)
LAT
LON
LAT
LON
144 (AORE) LOGOUT
Retuning
UNSYNC (144)
Idle
****
32818 Bytes free
IMN:
BBER
C/N
Send Level
Rx AGC Level
REF Offset Freq
Synthe Local
TCXO Control 2161
Antenna Power Supply
Water Temperature
Water Current
Direction
Speed
Depth
443156710
000
NG ( 0 dB)
OK ( 0)
OK (254)
NG ( 146 Hz)
OK
OK( 8.6V)
Current State: IDLE
DCE F18 Ver. 01
DEG
DEG
kn
Retuning
NCS: AORE LOGOUT
19-07-18 22:40 (UTC)
No alert
19-07-18 22:40 (UTC)