Furuno INMARSAT-C FELCOM 18 - Page 39

3. SYSTEM INITIALIZATION
3-7
9) Press the Enter key to show the [Update] window.
10)[Yes] is selected; press the Enter key.
Note: To restore all default color settings, select [Window Color Setup] from
the [Terminal Setup] menu, select [Load Default], press the Enter key then
press the Enter key again.
9. If a 2nd DTE is used, select [Window Size] then press the Enter key to select win-
dow size. Otherwise, skip to step 10.
1) Select [Normal] or [Large] as appropriate.
[Normal]: 800(H)×600(V)
[Large]: 1200(H)×900(V)
2) If you changed the size, the message "Please Restart." appears. Exit the PC
terminal and restart the terminal to reflect the change.
10. Long-press the Esc key to return to the standby display.