Furuno INMARSAT-C FELCOM 18 - Page 51

3. SYSTEM INITIALIZATION
3-19
4. Enter telex subscriber number (for ship-to-shore) or MES Inmarsat Mobile Num-
ber (for ship-to-ship) then press the Enter key. A maximum of 15 characters can
be used, including space.
5. Select [Remarks] then press the Enter key.
6. Enter remarks then press the Enter key. A maximum of 20 characters can be
used.
7. Press the Enter key to close the window.
8. Long-press the Esc key to return to the standby display.
Procedure for Fax
1. Select [Country Code] then press the Enter key.
2. For ship-to-shore fax, enter international country code; for ship-to-ship fax, enter
ocean region. Press the Enter key. A list of international telex country codes ap-
pears in the Appendix 4.
3. Select [Station ID] then press the Enter key.
4. Enter the fax number then press the Enter key.
5. Select [Modem Type] then press the Enter key.
6. Select the modem type used by the subscriber then press the Enter key. For a
landline fax or a fax-equipped Inmarsat B MES, select [T30 FAX].
7. Select [Remarks] then press the Enter key.
8. Enter remarks then press the Enter key. A maximum of 20 characters can be
used.
9. Press the Esc key to return to the Station List.
10. Long-press the Esc key to return to the standby display.
Procedure for e-mail
1. Select [Address] then press the Enter key.
2. Enter the e-mail address of the recipient then press the Enter key.
3. Select [Remarks] then press the Enter key.
4. Enter remarks then press the Enter key. A maximum of 20 characters can be
used.
5. To enter another e-mail address, repeat the procedure from step 2 on page 3-17.
6. Long-press the Esc key to return to the standby display.
Modem Type
300bps Duplex
1200bps Duplex
2400bps Duplex
600/1200bps
2400/1200bps
2400bps Duplex
4800/2400bps
9600bps Duplex
T30
V21
V22
V22B
V23
V26B
V26T
V27T
V32
Other
FAX
V.21
V.22
V.22bis
V.23
V.26bis
V.26ter
V.27ter
V.32