FUTABA 4PV - Page 109

Status display
RST :Reset state
RDY : Throttle trigger operation wait
RUN :Timer running
STP : Timer stopped
Operation wait
:Press the (JOG) button
TRG :Throttle trigger operation
109
Function
Timer selection
First, select the type of timer
at the "TYPE" item. The setup
screen varies depending on the
type of timer. This fi gure shows
the UP TIMER setup screen.
Timer Function "TIMER"
(Preparation)
Assign the "TIMER" switch using the function select switch (p.72).
1
(Racing timer type selection)
Select the setting item "TYPE" by moving the (JOG) button up
or down. Use the (+) or (-) button and set the racing timer type.
Timer selection (TYPE).
UP : Up timer.
DOWN : Down timer.
LAP : Lap timer.
2
When finished with setting, return to the MENU screen by
pressing the (END) button.
Racing timer type selection
Time display
Minute display (m)
Second display (s)
1/100 second display
Setup item selection
- Select by the (JOG) button.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
Timer screen
4PV-Eng-08-3-Function-P93-128.indd 109 2016/08/05 10:13:21