Select
"TLM VOICE"
VOLUM
LOW, HI
Select button
- Select with the (+) or (-) but-
tons.
Speech
ON/OFF
ON, OFF
Select button
- Select with the (+) or (-) but-
tons.
The voice feature cannot be
used if the telemetry function
is OFF and the receiver type is
set to S-FHSS.
119
Function
Telemetry "TELEMETRY"
1
(Setting of each item)
Select the setting item "RXBATT", "EXTVOL", "TEMP" or
"R.P.M" by moving the (JOG) button up or down, and set
speech ON/OFF with the (+) button or (-) button.
"
OFF
"
: No voice guide.
"
ON
"
: Information loaded by voice.
2
(Language setting)
Select setting item "LANGU" by moving the
(JOG) button up or down, and select "ENG",
"JPN", or "GER" with the (+) button or (-) button.
"
JPN
"
:Japanese.
"
ENG
"
:English.
"
GER
"
:German.
3
(Select the voice volume)
Select the setting item "VOLUM" by moving the (JOG) but-
ton up or down, and select the voice volume with the (+)
button or (-) button.
"
LOW
"
:Low range.
"
HI
"
:High range.
4
When finished with setting, return to the MENU screen by
pressing the (END) button.
The Speech function ON/OFF
The Speech Function Setting
If the telemetry function is running, you can listen to the information of the telemetry in the
voice announcement.
Display
"
TLM VOICE
"
screen using the following method:
4PV-Eng-08-3-Function-P93-128.indd 119 2016/08/05 10:13:22
To Next Page
Loading...
