80
Function
This function can be used with crawlers and other 4WS type vehicles. It is mixing which
uses the 1st CH to control the front side steering and the 3rd CH to control the rear side
steering.
OFF (front side only), reverse phase, same phase, rear side only and other 4WS type switch-
ing is used by selecting PS2 with the function select switch function (p.72). If not selected,
NO SW is displayed. Therefore, select PS2.
4WS Mixing "4WS"
(Steering, 3rd channel system)
Setup items
MODE
:
4WS Type
RATE
:
3ch rate (Rear side)
MXMD
:
Mix mode
4WS Mixing "4WS"
(Preparation)
Since this function is used by switching the type of 4WS with
a switch (PS2), the switch used by the function select switch
function (page 72) is set.
4WS mixing adjustment
:KHQWKHUG&+ZDVVHWWR$&7DW%UDNH0L[LQJSRUZKHQ*\UR0L[LQJS
is used, 4WS Mixing cannot be used.
Setting Special Mixes
Display
"
4WS
"
screen using the following method:
Function SW
4WS
4PV-Eng-08-2-Function-P70-92.indd 80 2016/08/05 9:41:38