FUTABA 4PV - Display When Power Switch Is Turned on; LCD Screen Contrast; Power off Forgotten Alarm

Timer
ST :Steering trim display
TH :Throttle trim display
D/R :Steering D/R display
ATL :Throttle ATL display
Power switch turned on
Model name (10 characters)
The current receiver mode is
displayed.
Telemetry function :ON/OFF
Receiver -> Transmitter:
The reception strength is shown.
Battery voltage
Servo operation of each channel
can be checked.
Model number
Telemetry data
%HHSFRQ¿UPDWLRQ VRXQGLV JHQHUDWHG DQGWKH
HOME screen shown below appears.
20
Before Using
LCD Screen Contrast
The LCD screen contrast can be adjusted. (For more information, see page 123.)
Caution
Do not adjust the contrast so that the LCD is too bright or too dark.
When the display cannot be read due to a temperature change, data cannot be set.
Power Off Forgotten Alarm & Auto Power Off
When the steering wheel, throttle trigger, push switch, or edit button are not operated for 10
minutes (default), an alarm sounds and
"
NOT OPERATED FOR A LONG
TIME
"
is displayed on the LCD screen.
When the steering wheel, throttle trigger, push switch, or edit button are op-
erated, the alarm is reset. If the alarm is not reset, the auto power off func-
tion will automatically turn off the power after 5 minutes. If the system is
not to be used, turn off the power.
The function can be deactivated at the system menu (p.123).
Display When Power Switch Is Turned On
4PV-Eng-04-Before-P12-28.indd 20 2016/08/02 9:06:10