FUTABA 4PV - Functions; Model MODEL; Model Menu Display

Current model # and model name
Model copy function.
Model name function.
ID of T-FHSS receiver linked last at this model
Model reset function.
Model selection function.
When a T-FHSS receiver is not linked with a model whose RX
type is set to T-FHSS, (NO LINK) is displayed.
When RX type is set to S-FHSS, nothing is displayed here
Setting item
SELECT :Model selection
COPY :Model copy
RESET :Model reset
(HOME screen)
(MENU 2 )
(MENU 3 )
(MODEL screen)
(MENU 1 )
Select
"MODEL"
Pres
s
Pres
s
Pres
s
45
Function
Function
Model "MODEL"
Model "MODEL"
Forty model data (data for 40 R/C cars) can be saved in the T4PV transmitter. This menu se-
lects the model and copies data between models.
Model Menu Display
The MENU 1 screen is displayed by moving the (JOG) button up, down, left or right at the
HOME screen.
Select
"
MODEL
"
by moving the (JOG) button up or down on the MENU 1 screen and press
the (JOG) button to display the MODEL screen.
When the (END) button is pressed from the MODEL screen, the display switches to the
MENU 1 screen and can then be switched to the HOME screen by pressing the (END) but-
ton from the MENU 1 screen.
4PV-Eng-08-1-Function-P45-69.indd 45 2016/08/05 9:35:31