Move the cursor to "RESET"
with the (JOG) button.
"COMPLETE!" is displayed.
The set RX type and T-FHSS receiver ID remain even if the model is reset. The same
receiver can be used as is without re-linking.
48
Function
Model "MODEL"
Using the model reset function
Model Reset "RESET"
This function resets and initializes the contents of the currently selected model data.
However, the adjuster function (ADJUSTER), system setting (SYSTEM), and type of re-
ceiver mode (TYPE) are not initialized.
- Display the MODEL screen by referring to page 45.
1
(Selection of model reset)
Select "RESET" by moving the (JOG) button up
or down.
2
(Model reset execution)
Press the (JOG) button for approximately 1
second. A beeping sound is generated and the
model is selected.
-Resetting is complete when
"
COMPLETE!
"
is displayed on
the screen.
3
When finished with setting, return to the MENU screen by
pressing the (END) button.
4PV-Eng-08-1-Function-P45-69.indd 48 2016/08/05 9:35:31
To Next Page
Loading...
