FUTABA 4PV - Exponential Adjustment EXP

+1 ~ +100
-1 ~ -100
Wheel operation
Mild
(Negative side)
Quick
(Positive side)
Wheel operation
Servo travel
Vertical cursor moves in step
with steering wheel operation.
Select
"EXP"
(HOME screen)
(MENU 2 )
(MENU 3 )
(EXP screen)(MENU 1 )
Pres
s
Pres
s
Pres
s
57
Function
Exponential Adjustment "EXP"
Exponential Adjustment "EXP"
(Steering/ Throttle system)
This function is used to change the sensitivity of the servo around the neutral position.
Display to
"
EXP
"
screen using the following method:
(Preparation)
- On the EXP screen,
select the setting item "STR" by moving the (JOG)
button up or down.
1
When you want to quicker steering operation,
use the (+) button to adjust the + side. When
you want to make steering operation milder, use
the (-) button to adjust the - side.
Steering EXP adjustment
When the setting is not determined, or the
characteristics of the model are unknown,
start with 0 . (When EXP is set to 0 , servo
movement is linear.)
STR (Steering EXP)
This function is used to change the sensitivity of the steer-
ing servo and around the neutral position. It has no effect
on the maximum servo travel.
Racers Tip
Adjustment range
-100~0~+100
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
2
When finished with setting, return to the MENU screen by
pressing the (END) button.
Setting item
STR :Steering
FWD :Throttle forward side
BRK :Throttle brake/ reverse side
4PV-Eng-08-1-Function-P45-69.indd 57 2016/08/05 9:35:34