Garmin GPSMAP 700 - Page 58

54 GPSMAP
®
700 Series Owner’s Manual
Device Conguration
Select Navigation Chart Setup > Overlay Numbers.
Select Fishing Chart Setup > Overlay Numbers.
Select Overlay Numbers.
5. Select
or to select a data overlay.
Conguring Data Fields on a Chart
You can select the type of data shown within a data eld.
1. From the Home screen, select
Charts.
2. Select a chart or a 3D chart view.
3. Select
Menu.
4. Complete an action:
Select Navigation Chart Setup > Overlay Numbers.
Select Fishing Chart Setup > Overlay Numbers.
Select Overlay Numbers.
5. Select
or to select a data overlay.
6. Touch a data eld.
7. Select a category of data.
8. Select the data that will be displayed.
Conguring the Navigation Inset on a Chart
The navigation inset is shown only when the boat is navigating to a destination.
1. From the Home screen, select
Charts.
2. Select a chart or a 3D chart view.
3. Select
Menu.
4. Complete an action:
Select Navigation Chart Setup > Overlay Numbers.
Select Fishing Chart Setup > Overlay Numbers.
Select Overlay Numbers.
5. Select
or to select a data overlay.
6. Select
Navigation Inset.
7. Select
Nav. Inset Cong.
8. Complete an action:
Select Route Leg Details > On to show waypoint velocity made good (VMG) when
navigating a route with more than one leg.
Select Next Turn > Distance to show next-turn data based on distance.
Select Next Turn > Time to show next-turn data based on time.
Select Destination, and select Distance, Time to Destination, or Arrival to indicate how the
destination data appears.
•
•
•
•
•
•
•
•
•
•
•
•
•