AquaTrans™ AT600 User’s Manual 147
Chapter 6. Communication
Command 205 (0xCD): Write Transducer Traverses and Spacing
This command is to write transducer traverses and spacing.
Table 131: Request Data Bytes for Write Transducer Traverses and Spacing
Byte Format Description
0 Unsigned-8 Transducer traverse
1 - 4 float Transducer spacing
Table 132: Response Data Bytes for Write Transducer Traverses and Spacing
Byte Format Description
0 Unsigned-8 Transducer traverse
1 - 4 Unsigned-32 Transducer spacing
Table 133: Command-Specific Response Codes for Write Transducer Traverses and Spacing
Code Class Description
0 Success No Command-Specific Errors
1-4 Undefined
5Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7Error In Write Protect Mode
8-15 Undefined
16 Error Access Restricted
17-127 Undefined
To Next Page
Loading...
