AquaTrans™ AT600 User’s Manual 151
Chapter 6. Communication
Command 210 (0xD2): Read Reynolds KFactor Table
This command is to read Reynolds KFactor table.
Table 143: Request Data Bytes for Read Reynolds KFactor Table
Byte Format Description
0 Unsigned-8 Reynolds KFactor Index (1 - 6)
Table 144: Response Data Bytes for Read Reynolds KFactor Table
Byte Format Description
0 Unsigned-8 Reynolds KFactor Index (1 - 6)
1 – 4 Float Reynolds Value
5 – 8 Float Reynolds KV Value;
Table 145: Command-Specific Response Codes for Read Reynolds KFactor Table
Code Class Description
0 Success No Command-Specific Errors
1Undefined
2 Error Invalid Selection
3-4 Undefined
5Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7-127 Undefined
To Next Page
Loading...
