AquaTrans™ AT600 User’s Manual 155
Chapter 6. Communication
Command 224 (0xE0): Read Error Limits
This command is to read flow meter error limits.
Table 155: Request Data Bytes for Read Error Limits
Byte Format Description
0 Unsigned-8 Error limit:
1. Correlation Peak Limit
2. Acceleration Limit
3. Velocity Low Limit
4. Velocity High Limit
5. Amp Disc Min
6. Amp Disc Max
7. Signal Low Limit
8. Sound Speed Limit
9. Errors Allowed
Table 156: Response Data Bytes for Read Error Limits
Byte Format Description
0 Unsigned-8 Error limit:
1. Correlation Peak Limit
2. Acceleration Limit
3. Velocity Low Limit
4. Velocity High Limit
5. Amp Disc Min
6. Amp Disc Max
7. Signal Low Limit
8. Sound Speed Limit
9. Errors Allowed
1-4 float Error limit Value;
Table 157: Command-Specific Response Codes for Read Error Limits
Code Class Description
0 Success No Command-Specific Errors
1Undefined
2 Error Invalid Selection
3-4 Undefined
5 Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7-127 Undefined
To Next Page
Loading...
