AquaTrans™ AT600 User’s Manual 157
Chapter 6. Communication
Command 226 (0xE2): Read Flowmeter S/N
This command is to read flow meter s/n.
Table 161: Request Data Bytes for Read Flowmeter S/N
Byte Format Description
0 Unsigned-8 Flowmeter S/N:
1. Electronic S/N
2. UP Sensor
3. S/N
4. DN Sensor S/N
Table 162: Response Data Bytes for Read Flowmeter S/N
Byte Format Description
0 Unsigned-8 signal setup type:
1. Electronic S/N
2. UP Sensor
3. S/N
4. DN Sensor S/N
1 - 16 Unsigned-8 S/N
Table 163: Command-Specific Response Codes for Read Flowmeter S/N
Code Class Description
0 Success No Command-Specific Errors
1Undefined
2 Error Invalid Selection
3-4 Undefined
5 Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7-127 Undefined
To Next Page
Loading...
