AquaTrans™ AT600 User’s Manual 79
Chapter 4. Initial Setup and Programming
4.7.5.2 Entering a Special Transducer (cont.)
Press [] again, and a screen similar to the following opens.
Use the [] or [] key to select a specific digit, then use the [] or [] key
to change that digit as required. After all digits are correct, press
[] to
save. Then, press [
] to return to the previous screen.
Select
Time Wedge and press [√]. The following screen opens.
Press
[] again, and a screen similar to the following opens.
Use the [] or [] key to select a specific digit, then use the [] or [] key
to change that digit as required. After all digits are correct, press
[] to
save. Then, press [
] to return to the previous screen.
Wedge SNSD
UNIT: m/s
248
2
]MOVE
]UNDO [ ]SAVE
]
]
]MODF
[
Frequency
Wedge Angle
Wedge SNSD
Time Wedge
UNIT: us
7.500
]MOVE
]UNDO [ ]SAVE
To Next Page
Loading...
