D-6 CASE Revision C
2060290-201
Technical Description: Technical Specifications – CASE System
* Paper discoloration may occur at higher temperatures.
Table 4. Writer
Item Description
Technology “Instant” load thermal dot array
Leads 3, 6, 12, or 15 (standard, NEHB, Cabrera, configurable)
Speeds 5, 12.5, 25, and 50 mm/s (±2 %)
Sensitivity/Gain 2.5, 5, 10, or 20 mm/mV (±5 %)
Resolution Horizontal 1000 lines/s x 200 dpi dedicated local printing, 200 x 200 dpi
generic printing
Paper type Thermal, perforated, fanfold, 300 sheets per pack
Paper size Letter size 214.6 mm x 280 mm (8.45 in. x 11 in.)
A4 size 210 mm x 280 mm (8.27 in. x 11 in.)
Table 5. Environmental – Power Requirements
Item Description
Power supply AC operation only
Operating voltage range 100–120 VAC, 47–63 Hz, 2.8 A
200–240 VAC, 47–63 Hz, 1.4 A
Power consumption 350 Watts maximum 1200 BTU/Hr
<250 Watts normal 850 BTU/Hr
<30 Watts standby 100 BTU/Hr
Operating conditions
Temperature
Humidity
Pressure
+10 to +40 °C (+50 to 104 °F)
20 to 95 % RH non-condensing
700 to 1060 hPa
Storage/Transport conditions
Temperature
Humidity
Pressure
-40 to +70 °C (-40 to 158 °F)*
15 to 95 % RH non-condensing
500 to 1060 hPa
To Next Page
Loading...
