GFK-2958E RSTi-EP User Manual 177
Operating Principle of the Hysteresis when Counter Value
≥
Comparison Value, Pulse Duration 0
1 Comparison condition met ➝ output is set and hysteresis activated
2 Comparison condition not met, leaving the hysteresis range ➝ output is reset
3 Comparison condition met ➝ output is set and hysteresis activated
4 Leaving the hysteresis range, the output remains set because the comparison condition is still met
5 Comparison condition no longer met but hysteresis still active ➝ output remains set
6 Comparison condition met, hysteresis still active ➝ output remains set
7 Leaving the hysteresis range and comparison condition met ➝ output remains set
Operating Principle of the Hysteresis when Counter Value = Comparison Value, Pulse Duration 0
1 Comparison condition met ➝ output is set and hysteresis activated
2 Comparison condition not met, leaving the hysteresis range ➝ output is reset
3 Comparison condition met ➝ output is set and hysteresis activated
4 Leaving the hysteresis range and comparison condition not met ➝ output is reset
5 Comparison condition met ➝ output is set and hysteresis activated
6 Comparison condition met and hysteresis active ➝ output remains set
7 Leaving the hysteresis range and comparison condition no longer met ➝ output is reset
To Next Page
Loading...
