Introduction
50940411/G0219 16 Printed in U.S.A.
• Vary traffic patterns to avoid exposure to
rough terrain.
4. Maintain equipment. Check that seat suspension
and all controls work smoothly and properly.
Vibration Levels
See “Vibration Levels” on page 44 for a table listing
typical whole-body vibration levels for the machine.
Fire Extinguisher
An installation location for a fire extinguisher is on
the shelf between the rear window and the operator's
seat (Z, Fig. 3).
IMPORTANT:
Installation of a fire extinguisher
according to DIN-EN 3 must be performed by an
authorized dealer.
NOTE: A fire extinguisher is neither included as
standard equipment nor available as an option from
Manitou Group.
IMPORTANT: Inspect the fire extinguisher at reg-
ular intervals as recommended by the fire extin-
guisher equipment manufacturer(s).
Manufacturer Information
Products described in this manual are manufactured
by Manitou Group.
NOTE:
Not all models and options described in
this manual are available in all areas.
Fig. 3 – Location for Fire Extinguisher
Z
To Next Page
Loading...
