Operation
50940411/G0219 70 Printed in U.S.A.
Checks During Operation
Complete these checks after starting the engine and
during operation:
Parking Checks
Complete these checks when parking the machine:
Table 32: Checks During Operation
Check Refer To:
Always after Starting the Engine / During Operation
Engine oil pressure and charge
indicator lights not on?
“Multi-Function Display”
on page 48
Park brake operating properly?
“Travel Drive Operation”
on page 88
Coolant temperature within
specification?
“Multi-Function Display”
on page 48
Track drive/steering operating
properly?
“Travel Drive Operation”
on page 88
Engine exhaust excessively
smoky?
Anyone hazardously close to the
machine?
Visually check if automatic track
tensioning is operating correctly.
Hydraulic functions sluggish or
too sensitive?
Adjust control function
sensitivity according to
“Joystick Control
Sensitivity” on page 58
Travel drive operation sluggish or
too fast?
If equipped, adjust travel
speed limit according to
“Travel Speed Limit
(Option)” on page 64
When Driving on Public Roads
Attachments in transport position?
“Attachment Transport
Position” on page 96
Machine work hydraulics locked-
out?
“Parking Brake/Work
Hydraulics Lock-out” on
page 60
Table 33: Parking Checks
Check Refer To:
Always when Parking
Mandatory Safety Shutdown
Procedure performed?
“Mandatory Safety
Shutdown Procedure” on
page 20
Attachments lowered to the
ground?
Parking brake applied?
“Parking Brake/Work
Hydraulics Lock-out” on
page 60
Machine cab locked (especially if
the machine will not be
supervised).
When Parking on Public Sites
Machine adequately secure/cab
locked?
To Next Page
Loading...
Need help?
General
