Getinge Maquet FLOW-i 4.2 User Manual

DescriptionAlarm
The measured expiratory CO
2
exceeds the alarm
limit.
EtCO
2
: High
The measured expiratory CO
2
is below the alarm
limit.
EtCO
2
: Low
Measured AA concentration during insp. is below
alarm limit
FiAA: Low
Measured AA concentration during expiration is
below alarm limit
EtAA: Low
The MAC of the secondary agent is ≥0.6 and the
total MAC value is ≥3
Agent mixture: MAC > 3
Measured MAC
18
exceeds alarm limit.
19
High continuous MAC
17
Vaporizer liquid level is below 5%Vaporizer nearly empty
The last performed System checkout was not
performed with the current patient cassette.
Re-perform System checkout.
Patient cassette replaced
The gas analyzer has detected that a water trap is
missing
Water trap missing
The gas analyzer has detected that a water trap
replacement is needed
Replace water trap
17. Manual gas control only
18. In order to reflect time lag due to pharmacokinetics between alveolar concentration and the target organ brain
concentration, the high continuous MAC alarm activation and deactivation are delayed.
19. The high MAC alarm limit is 2.2 MAC, from starting a New Case, until 15 minutes after initial Vaporizer activation.
Otherwise, it will be 1.8 MAC
FLOW-i 4.2, User's Manual
199
| Alarms and patient safety |
9 |

Getinge Maquet FLOW-i 4.2 Specifications

General

Brand	Getinge
Model	Maquet FLOW-i 4.2
Category	Medical Equipment
Language	English