2-1
Chapter 2 Preparation for Printing
Chapter 2 Preparation for Printing
This chapter explains the preparation prior to printing.
Product Summary
2.1 Preparing the Cutter Pen
2.2 Installing Tools (cutter pen)
2.3 Using the Control Panel
2.4 Connecting to the Power Supply
2.5 Setting Label Materials (media)
2.6 Loading Label Materials (media)
2.7 Setting the Push Roller
2.8 Setting the Ink Ribbo
n
2.9 Adjusting the Function Setting
2.10 Using the Separator
2.11 Using the Laminate
2.12 TOOL COND. Key
2.13 Selecting Tool Conditions
2.14 Adjusting the Blade Length
2.15 Cutting Test
2.16
When the Machine Stops During a Printing/Cutting Operation
2.17 CROSS CUT Key
To Next Page
Loading...