1
SpectroEye™ 9
SpectroEye is not flameproof, therefore the device must
not be used in environments where the risk of explosion
exists, or in areas subject to strong electromagnetic fields.
Do not use SpectroEye in ambient temperatures
in excess of 40°C (104° F).
Never open SpectroEye. Unauthorised opening of
the device shall immediately invalidate the warrantee.
For any repairs, contact your authorised dealer.
Ensure that the supply cable provided is connected
to a mains socket equipped with earth contact to avoid
a shock hazard.
The specified operating conditions
are given in the appendix under
item 4.1 “Technical specifications”.
1 Set-up
1.1 General
1.1.1 General safety recommendations
Failure to observe the safety recommendations and instructions
given by this manual may result in measurement error and loss
of data, as well as damage to persons and property.
To avoid operating errors, SpectroEye should be used
exclusively by specifically trained personnel.
SpectroEye must only be used on dry, flat, horizontal
and stable surfaces, and must not be exposed to direct
sunlight.
SpectroEye must only be used in the operating
conditions specified below.
SpectroEye must be protected from chemical
substances, corrosive vapours, strong mechanical
vibration and impact.
Use only GretagMacbeth original spare parts
and accessories.
For transport purposes only use the original packing
and secure the instrument with the transport protection
(Settings > General > Transport protection).
1 • Set-up
Read chapter 1.3.
The SpectroEye case must be kept clean using
a clean cloth slightly dampened in soapy water.
To Next Page
Loading...