GSE 574 - Page 68

GSE Scale Systems - 49
Chapter 4 Parameter Setup (Advanced) Technical Reference Manual
PARAMETER # SELECTION DESCRIPTION
SECTION - 4.6
P5130.6 Acc Output de-active if ACC
operation occurs.
P5130.7 Mot'n Output de-active if motion
occurs.
P5130.8 NotMt Output de-active if motion
ceases.
P5130.9 Alwys Any activation is momentary.
P5130.10 never Output will not become de-
active on its own.
P5131.0 Hold * 0.0 No extra delays.
P5131.1 0.1 1/10 second minimum de-
activation time.
P5131.2 0.2 2/10 second minimum de-
activation time.
P5131.3 0.3 3/10 second minimum de-
activation time
thru thru
P5131.º 25.0 25.0 second minimum de-
activation time
P5132.0 Macro 0 Macro 0 will execute when
setpoint de-activates
P5132.1 1 Macro 1 will execute when
setpoint de-activates.
P5132.2 2 Macro 2 will execute when
setpoint de-activates
P5132.3 3 Macro 3 will execute when
setpoint de-activates
P5132.4 4 Macro 4 will execute when
setpoint de-activates
P5132.5 5 Macro 5 will execute when
setpoint de-activates
P5132.6 6 Macro 6 will execute when
setpoint de-activates
P5132.7 7 Macro 7 will execute when
setpoint de-activates
P5132.8 8 Macro 8 will execute when
setpoint de-activates
P5132.9 9 Macro 9 will execute when
setpoint de-activates
P5132. 10 Macro 10 will execute when
setpoint de-activates
P5132. 11 Macro 11 will execute when
setpoint de-activates.
P5132. 12 Macro 12 will execute when
setpoint de-activates