GSE 574 - 6.3 Parts Counting Parameter Setup

GSE Scale Systems - 55
Chapter 4 Parameter Setup (Advanced) Technical Reference Manual
PARAMETER # AUTO-CONFIGURATION DESCRIPTION
SECTION - 4.6
P61102. ReZro Re-Zero Weight
P61103. ZrTrk Wght Displays amount of weight in default
units tracked off by the zero track
feature since last use of the <ZERO>
key.
P61104. CZero %0 Coarse zero value calculated during
calibration. This value is a
combination of parameters 61110 thru
61112.
P61105. Fine Zero XXXXX Fine zero value calculated during
during calibration.
P61106. CGain XX Coarse gain value calculated during
calibration. This value is a
combination of parameters 61113 thru
61116.
P61107. Fine Gain XX Fine gain value calculated during
calibration.
P61110. Zero Adj25 X Compensation for the coarse zero
(P61104) Any combination of P61110
thru 61112 will be used to achieve the
value of P61104.
P61111. Zero Adj50 X Compensation for the coarse zero
(P61104) Any combination of P61110
thru 61112 will be used to achieve the
value of P61104.
P61112. Zero Ad100 X Compensation for the coarse zero
(P61104) Any combination of P61110
thru 61112 will be used to achieve the
value of P61104.
P61113. Gain Adj1 X Compensation for the coarse gain
(P61106) Any combination of P61113
thru 61116 will be used to achieve the
value of P61106.